Copper surface treatment process
Copper surface treatment process, copper surface deoxid […]
Copper surface treatment process, copper surface deoxidation cleaning agent, mainly for copper surface oxidation treatment, polished, surface anti-slip treatment has strong durability, saving time and effort, fast opening, -30 °C low temperature can also be constructed!
1 Plasma cutting: After plasma cutting, the cutting slag should be cleaned up. When cutting in batches, the existing parts should be cleaned up in time to avoid smudging of the workpiece.
2 sawing and cutting: When sawing and cutting, the clamping should be protected by rubber. After sawing, the oil and residue on the workpiece should be cleaned.
1Machining: Stainless steel parts should also be protected during machining such as turning, milling, etc. The oil stains, iron filings and other debris on the surface of the workpiece should be cleaned up.
2 Molding and processing: In the process of coiling and bending, effective measures should be taken to avoid scratching and creases on the surface of stainless steel parts.
3 Riveting: When the stainless steel parts are paired, the forced assembly should be avoided, especially the flame grilling assembly. If there is temporary plasma cutting during the group or manufacturing process, isolation measures should be taken to avoid contamination of other stainless steel parts by the slag. After cutting, the slag on the workpiece should be cleaned.